Clipping Saw Blades HW for wood optimization "WSA"
Article
Description
Machine / Application
- optimizing chop saws
- undertable cross-cut saws
- push-feed saws
- through-feed saws
- for cross cuts in solid woods
Design
- positive hook angle
- tooth configuration: alternate top bevel with shear angle "WSA"
- cutting material: HW HL Board 06
- extremely high bending strength and hardness of the teeth
Advantages
- reduced cutting pressure thanks to alternating shear angle
- long edge lives provide for the necessary productivity and economic efficiency
Notes
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Corner∡
[°] |
Shear∡
[°] |
Tooth geometry | Cutting quality* | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||||||
400 | 3,4 | 2.8 | 30 | 120 | 2/10/60 | 2 | 40 | 5 | WSA | HL Board 06 | DIMTER QUANTUM | 189896 | |||
400 | 4,6 | 3.5 | 30 | 120 | 2/10/60 | 2 | 40 | 5 | WSA | ▲▲▲ | HL Board 06 | DIMTER | 189833 | ||
450 | 4,6 | 3.5 | 30 | 132 | 2/15/63 | 2 | 40 | 5 | WSA | ▲▲▲ | HL Board 06 | DIMTER | 189834 | ||
500 | 4,6 | 3.5 | 30 | 144 | 2/15/63 | 2 | 40 | 5 | WSA | HL Board 06 | DIMTER | 189835 | |||
520 | 4,6 | 3.5 | 30 | 144 | 2/15/63 | 2 | 40 | 5 | WSA | HL Board 06 | 189836 | ||||
600 | 5,2 | 3.8 | 30 | 172 | 2/15/63 | 2 | 40 | 5 | WSA | HL Board 06 | DIMTER | 189838 | |||
630 | 5,4 | 4 | 30 | 180 | 2/15/63 | 2 | 40 | 5 | WSA | HL Board 06 | 189839 |