192512 - Clipping Saw Blades HW for edge trimming "ES" - nn-System, without countersink
Technical data
Description
Machine / Application
- edge banders
- edge trimming machines
- for trimming of thin plastic-, veneer- and solid wood edges
Design
- special NoNoise gullet geometry
- positive or negative hook angle
- with and without shear angle
- tooth configuration: top bevel "ES (right + left)"
- cutting material: HW HL Board 06
Advantages
- especially low noise level
- noise reduction by approx. 6 dB(A) when idling
Notes
- sense of rotation see drawing
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 100 [mm] | |
B = Cutting width | 2,6 [mm] | |
b = Body thickness | 1.6 [mm] | |
Ø d = Bore diameter | 32 [mm] | |
Z = No. of teeth | 30 | |
Hook angle = Hook angle | 10 [°] | |
Corner∡ = Corner angle | 10 [°] | |
L/R = cutting direction | R | |
Shear∡ = Shear angle | 0 [°] | |
Tooth geometry = Tooth configuration | ES | |
Cutting quality* = Cutting quality | ▲▲ | |
LEUCODUR = Cutting material | HL Board 06 | |
L = Delivery Status | ||
Machine/Type | Brandt | |
Dimensions entered are not listed?
available from stock |