192487 - Clipping Saw Blades HW for edge trimming "WS" - nn-System, with countersink
Technical data
Description
Machine / Application
- edge trimming machines
- for trimming of plastic-, veneer- and solid wood edges
Design
- special NoNoise gullet geometry
- positive hook angle
- with or without shear angle
- pin holes with countersink
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 06
Advantages
- especially low noise level
- noise reduction by approx. 6 dB(A) when idling
Notes
- Ident-No. 192494 NL=4/5,5/52 have no countersink
- sense of rotation according to VDMA 8849
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 125 [mm] | |
B = Cutting width | 2,4 [mm] | |
b = Body thickness | 1.6 [mm] | |
Ø d = Bore diameter | 30 [mm] | |
Z = No. of teeth | 36 | |
NL = Pin holes | 2x4/6,5/48 | |
Hook angle = Hook angle | 10 [°] | |
Corner∡ = Corner angle | 30 [°] | |
Shear∡ = Shear angle | 0 [°] | |
Tooth geometry = Tooth configuration | WS | |
Cutting quality* = Cutting quality | ▲▲▲ | |
LEUCODUR = Cutting material | HL Board 06 | |
L = Delivery Status | ||
Machine/Type | Homag BAZ | |
Dimensions entered are not listed?
available from stock |