193192 - Panel Sizing Saw Blades HW - Q-Cut "G6" - nn-System
Technical data
Description
Machine / Application
- panel sizing saws
- for finish cuts in veneered, foiled or melamine-laminated panels, in single sheets or in stacks up to 60 mm cutting height
Design
- special nn-System gullet geometry
- tooth configuration: G6
- cutting material: HW HL Board 04 plus
Advantages
- especially low noise level
- noise reduction by up to approx. 6 dB(A) when idling
- for highest performance demands
- impressive cutting quality thanks to exact and precise cuts without chippings
- reduced cutting pressure and power consumption thanks to optimized cutting geometry
- clearly increased edge life thanks to improved HW grade
Notes
- projection: min. 20 - 25 mm max. 40 mm
- NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 380 [mm] | |
B = Cutting width | 4,4 [mm] | |
b = Body thickness | 3.2 [mm] | |
Ø d = Bore diameter | 60 [mm] | |
Z = No. of teeth | 72 | |
NL = Pin holes | 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 | |
Hook angle = Hook angle | 15 [°] | |
Tooth geometry = Tooth configuration | G6 | |
LEUCODUR = Cutting material | HL Board 04 plus | |
L = Delivery Status | ||
Machine/Type | Homag (Holzma) | |
Dimensions entered are not listed?
available from stock |
suitable scoring saw blade
Product picture | Description | Design | Ident-No. | ||
---|---|---|---|---|---|
Scoring Saw Blades HW "WS" | Ø280x4,55xØ45 Z=84 | 189324 | |||
Scoring Saw Blades HW "KO-F" - nn-System | Ø180x4,45-5,25xØ45 Z=36 | 192701 | |||
Scoring Saw Blades HW "KO-F" - nn-System | Ø200x4,45-5,25xØ45 Z=36 | 192704 | |||
Scoring Saw Blades HW "KO-HR" - nn-System | Ø180x4,45-5,25xØ45 Z=36 | 192689 | |||
Scoring Saw Blades HW "KO-HR" - nn-System | Ø200x4,45-5,25xØ45 Z=36 | 192694 | |||
Scoring Saw Blades HW "KO-WS" | Ø180x4,45-5,25xØ45 Z=36 | 192734 | |||
available from stock |