193126 - Panel Sizing Saw Blades HW - U-Cut max "TR-F"
Technical data
Description
Machine / Application
- panel sizing saws
- for sizing cuts in plastic-laminated panels
Design
- up to ØD=360, 10 degree hook angle
- from ØD=380, 15 degree hook angle
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 04 plus
Advantages
- higher edge life thanks to up to 6 times more resharpenings than U-Cut TR-F
- noise reduction thanks to laser ornaments
Notes
- specifically for plastic-laminated panels and plywood in single sheets and stacks
- NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42
- NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 380 [mm] | |
B = Cutting width | 4,8 [mm] | |
b = Body thickness | 3.5 [mm] | |
Ø d = Bore diameter | 80 [mm] | |
Z = No. of teeth | 72 | |
NL = Pin holes | 2/7/110 + 2/9/110 + 2/8,4/130 + 2/14/110 + 4/9/100 + 4/19/120 | |
Hook angle = Hook angle | 15 [°] | |
Tooth geometry = Tooth configuration | TR-F | |
LEUCODUR = Cutting material | HL Board 04 plus | |
L = Delivery Status | ||
Machine/Type | Gabbiani, SCM, Selco | |
Dimensions entered are not listed?
available from stock |