192622 - Panel Sizing Saw Blades HW - U-Cut speed "TR-F"
Technical data
Description
Machine / Application
- horizontal panel sizing saws
- for stack cuts in raw and plastic-laminated panels
Design
- vibration and noise damping ornaments
- additional expansion slots
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 04 plus
Advantages
- for highest performance demands
- reduced cutting pressure and power consumption thanks to optimized cutting geometry
- extremely low-noise and smooth running thanks to vibration and noise damping ornaments as well as special expansion slot combinations
- clearly increased edge life thanks to improved HW grade
Notes
- stack height: Ident-No. 192629 up to max. 190 mm / Ident-No. 192631 up to max. 210 mm / Ident-No. 192633 up to max. 215 mm
- recommended projection: 20-30 mm
- NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 570 [mm] | |
B = Cutting width | 4,8 [mm] | |
b = Body thickness | 3.5 [mm] | |
Ø d = Bore diameter | 60 [mm] | |
Z = No. of teeth | 60 | |
NL = Pin holes | 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120 | |
Hook angle = Hook angle | 20 [°] | |
Tooth geometry = Tooth configuration | TR-F | |
LEUCODUR = Cutting material | HL Board 04 plus | |
L = Delivery Status | ||
Machine/Type | Homag (Holzma) | |
Dimensions entered are not listed?
available from stock |
suitable scoring saw blade
Product picture | Description | Design | Ident-No. | ||
---|---|---|---|---|---|
Scoring Saw Blades HW - adjustable "WS" | Ø340x4,4-5,6xØ45 Z=2x24 | 193262 | |||
NF-Chop Saw Blades HW - profiles "G7" | Ø250x3,2xØ30 Z=84 NL/DKN= 2/7/42 + 2/9/46 + 2/9,5/46,5 + 2/10/60 | 192965 | |||
Scoring Saw Blades HW "KO-F" - nn-System | Ø200x4,85-5,65xØ45 Z=36 | 192705 | |||
Scoring Saw Blades HW "KO-WS" | Ø200x4,85-5,65xØ45 Z=36 | 192745 | |||
available from stock |