CompactTec N Hoggers CM DP for LEUCO Hydro s-System Ø 160 mm and Bushing (RZ/DZ)
Article
Description
Machine / Application
- double-end tenoners
- edge banding machines
- for chip-free sizing of raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- negative hook angle
- tooth configuration chamfer ascending
- with shear angle
- resharpenable area 4 mm
Advantages
- improved chip evacuation thanks to chip evacuation integrated in the tool (ChipMeister)
- reduced cleaning effort
- reduction of suction power
- long edge lives thanks to negative hook angle
- minimal machine downtimes thanks to long edge lives
- excellent cutting quality thanks to high concentric and runout accuracy
Notes
- for scoring/hogging (RZ) and double hogging (DZ) process
- application with feed for cutting with and across the grain
- resharpenable on the flanks
- the specified feed rates are based on n = 6,000 min-1
- sense of rotation according to VDMA 8849
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Feed DZ
[m/min] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||
250 | 20-17 | 20 | 60 | 30+5+5 | 30 | R | 182536 | ||
250 | 20-17 | 20 | 60 | 30+5+5 | 30 | L | 182537 | ||
250 | 20-17 | 20 | 60 | 36+6+6 | 35 | L | 182538 | ||
250 | 20-17 | 20 | 60 | 36+6+6 | 35 | L | 182539 | ||
250 | 20-17 | 20 | 60 | 48+6+6 | 50 | L | 182541 | ||
250 | 20-17 | 20 | 60 | 48+6+6 | 50 | R | 182540 |