Combination Shank-Type Router Bits RH-LH DP - Z=3/1
Article
Description
Machine / Application
- CNC routers
- for sizing and dividing cuts in raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
- high-performance tool for pre- and finish-milling
Design
- Z=3 on right hand cutting section for highest feed rates
- Z=1 on left hand cutting section
- resharpenable area 3.2 mm
Advantages
- lower part of the cutter can be run in left hand rotation by adjusting the Z-axis and changing the direction of rotation; this allows optimum machining of frail edges utilizing only one spindle
Notes
- L2 eff. = L2 eff. = real cutting length; this tool has Z=3 the difference to L2 is Z=2; this allows the machining of all current panel boards
- workpiece secured on clamping blocks
- Clamping elements: ps-System, TRIBOS , draw-in collet chuck
- with thread for length adjusting screw
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z | Remarks | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||
25 | 2x22 | 25 | 62 | 129 | 3/1 | L2 eff. 19.5 mm | 179497 | ||
25 | 2x26 | 25 | 62 | 137 | 3/1 | L2 eff. 23.3 mm | 179498 | ||
25 | 2x30 | 25 | 62 | 145 | 3/1 | L2 eff. 27 mm | 179499 | ||
25 | 2x34 | 25 | 62 | 153 | 3/1 | L2 eff. 31 mm | 179500 |