DIAMAX Shank-Type Cutters DP
Article
Description
Machine / Application
- CNC routers
- for jointing and sizing without overlap marks in wood-based panels, solid woods and plastics
Design
- Polished face and high-finish clearance angle
- With HW plunge tip for diagonal plunge-cutting (simultaneous feed using Z and X axis)
- Ø 10 mm with plunge tip integrated in VHW body, all other diameters with brazed HW plunge tip
- Straight cutter axis
- Solid tungsten carbide body for Ø 5 mm to Ø 10 mm
Advantages
- high quality machining of MDF and hard woods
- no overlap-marks thanks to continuous cutting edge
- increased stability thanks to special design of brazing area
Notes
- Clamping elements: ps-System, TRIBOS , draw-in collet chuck
- Ø D=12 and 16 mm with thread for length adjusting screw
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z |
nmax
[min-1] |
Resharpening area
[mm] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||
5 | 12 | 12 | 40 | 60 | 1 | 24,000 | 0.2 | R | 183566 | ||
6 | 12 | 12 | 40 | 60 | 1 | 24,000 | 0.2 | R | 183567 | ||
8 | 12 | 12 | 35 | 60 | 1 | 24,000 | 0.5 | R | 178659 | ||
8 | 12 | 12 | 40 | 60 | 2 | 24,000 | 0.5 | R | 183568 | ||
8 | 22 | 12 | 35 | 70 | 2 | 24,000 | 0.5 | R | 187724 | ||
10 | 22 | 12 | 35 | 70 | 2 | 24,000 | 1.2 | L | 186785 | ||
10 | 22 | 12 | 35 | 70 | 2 | 24,000 | 1.2 | R | 186784 | ||
12 | 25.4 | 12 | 35 | 70 | 1 | 24,000 | 1.2 | R | 181102 | ||
16 | 25.4 | 16 | 45 | 85 | 1 | 24,000 | 1.2 | R | 181104 | ||
16 | 35 | 16 | 45 | 95 | 1 | 24,000 | 1.2 | R | 181106 |