186796 - DIAMAX Shank-Type Cutters DP - Z=1+1
Technical data
Description
Machine / Application
- CNC routers
- for jointing, rabbeting, grooving and copying in raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- with DP plunge tip for diagonal plunge-cutting
- with shear angle
- resharpenable several times
- n max = 24,000 min-1
Advantages
- optimum cutting quality thanks to larger shear angle, alternating top and bottom
- smooth running thanks to special tool body
- Chip-free grooving possible from groove depths of 4.5 mm
Notes
- Feed rates up to 8 m/min
- Recommended clamping elements: ps-System, TRIBOS, heat-shrinking chuck
- Tools with Ø d = 12, 16 and 20 mm without thread and Ø d = 25 mm with thread for length adjusting screw
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 16 [mm] | |
L4 = Cuttind width 1 | 4.1 [mm] | |
L2 = Cutting width | 35 [mm] | |
Ø d = Shank diameter | 16 [mm] | |
L3 = Shank length | 45 [mm] | |
L1 = Total length | 90 [mm] | |
Z = No. of teeth | 1+1 | |
nmax = maximum RPM | 24,000 [min-1] | |
Resharpening area = Resharpening area | 1 [mm] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |