DIAMAX High-Performance Shank-Type Cutters DP - Z=2+2
Article
Description
Machine / Application
- CNC routers
- for jointing, rabbeting, grooving and copying in raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- with DP plunge tip for diagonal plunge-cutting
- with shear angle
- resharpening area 1.2 mm
- n max = 24,000 min-1
Advantages
- optimum cutting quality thanks to shear angle, alternating top and bottom
- smooth running thanks to 4-wing design of cutting edges
- very long edge lives, less cutting forces and less noise thanks to optimized tool body
Notes
- feed rates up to 20 m/min
- Clamping elements: ps-System, TRIBOS , draw-in collet chuck
- with thread for length adjusting screw
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z |
nmax
[min-1] |
Resharpening area
[mm] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||
16 | 28 | 16 | 45 | 80 | 2+2 | 24,000 | 1.2 | R | 186147 | ||
16 | 38 | 16 | 45 | 90 | 2+2 | 24,000 | 1.2 | R | 186148 | ||
16 | 38 | 16 | 45 | 90 | 2+2 | 24,000 | 1.2 | L | 186149 | ||
20 | 28 | 20 | 55 | 95 | 2+2 | 24,000 | 1.2 | R | 186150 | ||
20 | 28 | 25 | 55 | 95 | 2+2 | 24,000 | 1.2 | R | 186151 | ||
20 | 28 | 25 | 55 | 95 | 2+2 | 24,000 | 1.2 | L | 186152 | ||
20 | 38 | 20 | 55 | 105 | 2+2 | 24,000 | 1.2 | R | 186153 | ||
20 | 38 | 25 | 55 | 105 | 2+2 | 24,000 | 1.2 | R | 186154 | ||
20 | 38 | 25 | 55 | 105 | 2+2 | 24,000 | 1.2 | L | 186155 | ||
20 | 48 | 20 | 55 | 115 | 2+2 | 24,000 | 1.2 | R | 186156 | ||
20 | 48 | 25 | 55 | 115 | 2+2 | 24,000 | 1.2 | R | 186157 | ||
20 | 48 | 25 | 55 | 115 | 2+2 | 24,000 | 1.2 | L | 186158 | ||
25 | 65 | 25 | 55 | 130 | 2+2 | 24,000 | 1.2 | R | 186159 | ||
25 | 65 | 25 | 55 | 130 | 2+2 | 24,000 | 1.2 | L | 186160 |