Finishing Cutters VHW - ecoline
Article
Description
Machine / Application
- CNC routers
- for finish-cutting in solid woods, plywood and uncoated panels
- for cutting of cut-outs and contours
- traveling plunge cut using Z and X or Y axis
Design
- positive spiral for tightly clamped workpieces face side down
- negative spiral for smaller workpieces hard to clamp with face side up
- n max = 30,000 min-1
Advantages
- high hogging volume
- optimum upward chip evacuation thanks to positive spiral
- optimum downward chip evacuation thanks to negative spiral
- well-priced version
Notes
- ecoline design = reduced number of traces and less resharpening possibilities
- clamping elements: ps-System with reducing sleeves Class-No. 933280, TRIBOS, draw-in collet chuck
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z | Helical direction |
nmax
[min-1] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||
3 | 15 | 3,0 | 36 | 60 | 2 | positive | 30,000 | R | 183937 | ||
3 | 15 | 6,0 | 36 | 60 | 2 | positive | 30,000 | R | 183938 | ||
4 | 15 | 4,0 | 36 | 60 | 2 | positive | 30,000 | R | 183939 | ||
4 | 15 | 4,0 | 28 | 60 | 2 | negative | 30,000 | R | 183940 | ||
4 | 15 | 6,0 | 36 | 60 | 2 | positive | 30,000 | R | 183941 | ||
5 | 15 | 6,0 | 36 | 60 | 2 | positive | 30,000 | R | 183942 | ||
6 | 22 | 6,0 | 30 | 60 | 2 | positive | 30,000 | R | 183943 | ||
6 | 22 | 6,0 | 31 | 65 | 2 | negative | 30,000 | R | 80493083 | ||
6 | 27 | 6,0 | 34 | 70 | 2 | positive | 30,000 | R | 80106060 | ||
8 | 30 | 8,0 | 36 | 75 | 2 | positive | 30,000 | R | 183945 | ||
8 | 30 | 8,0 | 36 | 80 | 2 | negative | 30,000 | R | 80493084 | ||
10 | 30 | 10 | 35 | 75 | 2 | positive | 30,000 | R | 183947 | ||
10 | 30 | 10 | 33 | 80 | 2 | negative | 30,000 | R | 80493085 | ||
12 | 42 | 12 | 40 | 90 | 3 | positive | 30,000 | R | 183949 |