High-Performance Shank-Type Cutters CM DP Nesting - Z=2+2
Article
Description
Machine / Application
- CNC routers
- for panel sizing with Nesting Technology
- for jointing, rabbeting and *grooving (*negative design)
- particularly for processing MDF panels and Multiplex
Design
- with DP plunge tip
- face cutting for diagonal plunge-cutting
- Ø D=12 mm with highly stiff tool body
- resharpening area 1.6 mm
- n max = 24,000 min-1
Advantages
- high cutting quality and high-quality cutting edges on both sides thanks to specially adapted arrangement of cutting edges
- positive spiral: optimum upward chip evacuation towards the dust extraction
- negative spiral: downward chip evacuation and cutting pressure
- negative spiral especially suitable for smaller or narrow workpieces and for grooving
- Z=2+2 = bigger gullets for better chip removal (MDF) and for reducing heat generation, particularly when processing Multiplex
Notes
- clamping elements: use in high-precision clamping elements recommended (e.g. TRIBOS, ps-System)
- with thread for length adjusting screw
- in case of higher feed rates and thicker boards choose the higher diameter
- adapt the cutting length to the panel thickness (H)
- * indicate "H" in case of Nesting with protection board
Ø D
[mm] |
L4
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z | Helical direction |
nmax
[min-1] |
H
[mm] |
Resharpening area
[mm] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||||
12 | 22 | 16 | 45 | 75 | 2+2 | positive | 24,000 | 16-19 * | 1.6 | R | 187075 | |||
12 | 4.5 | 22 | 16 | 45 | 75 | 2+2 | negative | 24,000 | -19 | 1.6 | R | 187076 | ||
16 | 4.5 | 28 | 16 | 45 | 80 | 2+2 | negative | 24,000 | -25 | 1.6 | R | 187077 |