187282 - High-Performance Shank-Type Cutters CM DP Nesting - Z=3+3
Technical data
Description
Machine / Application
- CNC routers
- for panel sizing with Nesting-Technology
- for jointing, rabbeting and *grooving (*negative version) in raw and laminated panels
Design
- with DP plunge tip
- face cutting for diagonal plunge-cutting
- Ø D=12+14 mm with highly stiff tool body
- feed rates up to 25 m/min
- resharpening area 1.6 mm
- n max = 24,000 min-1
Advantages
- high cutting quality and high-quality cutting edges thanks to specially adapted cutting edge configuration
- positive spiral: optimum upward chip evacuation towards the exhaustion
- negative spiral: downward chip evacuation and cutting pressure
- negative spiral especially for smaller or narrow workpieces and for grooving
Notes
- clamping elements: use in high-precision clamping elements recommended (e.g. TRIBOS, ps-System)
- with thread for length adjusting screw
- in case of higher feed rates and thicker boards choose the higher diameter
- adapt the cutting length to the panel thickness (H)
- * indicate "H" in case of Nesting with protection board
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 14 [mm] | |
L4 = Cuttind width 1 | 7.2 [mm] | |
L2 = Cutting width | 33 [mm] | |
Ø d = Shank diameter | 16 [mm] | |
L3 = Shank length | 45 [mm] | |
L1 = Total length | 85 [mm] | |
Z = No. of teeth | 3+3 | |
Helical direction = Helical direction | negative | |
nmax = maximum RPM | 24,000 [min-1] | |
H = Wood thickness | -30 [mm] | |
Resharpening area = Resharpening area | 1.6 [mm] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |