High-Performance Trimming Router Bits DP - Z=4+2+4
Article
Description
Machine / Application
- CNC routers
- for sizing cuts in raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- high-performance tool for finish cuts
- with shear angle
- resharpening area 3.0 mm
Advantages
- high feed rates (up to 35 m/min) and good edge quality thanks to 4 cutting edges working in top layer
- minimized formation of dust thanks to 2 cutting edges working in core of board
- very good surface thanks to large cutting circle diameter
- good cutting quality on top and bottom edge thanks to opposing shear angle
Notes
- preferably for finish-cut operations on pre-sized workpieces
- Clamping elements: ps-System, TRIBOS , draw-in collet chuck
- with thread for length adjusting screw
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z |
nmax
[min-1] |
H
[mm] |
Resharpening area
[mm] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||
48 | 22 | 25 | 62 | 85 | 4+2+4 | 24,000 | 16-19 | 3 | L | 186139 | ||
48 | 22 | 25 | 62 | 85 | 4+2+4 | 24,000 | 16-19 | 3 | R | 186140 | ||
48 | 28 | 25 | 62 | 91 | 4+2+4 | 24,000 | 22-25 | 3 | L | 186141 | ||
48 | 28 | 25 | 62 | 91 | 4+2+4 | 24,000 | 22-25 | 3 | R | 186142 | ||
48 | 35 | 25 | 62 | 98 | 4+2+4 | 24,000 | 28-32 | 3 | L | 186143 | ||
48 | 35 | 25 | 62 | 98 | 4+2+4 | 24,000 | 28-32 | 3 | R | 186144 | ||
48 | 48 | 25 | 55 | 110 | 4+2+4 | 24,000 | 35-45 | 3 | R | 186145 |