Rabbeting Shank-Type Cutters with HW Turnover Knives - t3-System
Article
Description
Machine / Application
- CNC and joinery machines
- for offset and chip-free rabbeting of solid wood and wood-based materials
Design
- Rounded triangular turnover knives with cutting edges drawing from top to bottom
- also for rabbets <21 mm
- Cutting material: HW
- HL Solid 20 for hard wood and soft wood
- HL Board 06 for wood-based materials, plastics and hard woods
- topcoat coating for increased edge lives
Advantages
- absolutely chip-free rabbeting
- Thanks to the rounded turnover knives the machined surface is offset-free
- excellent edge and surface quality
- very high milling performance
- spiral plunge-cutting for free form milling
- Triangular turnover knives with rounded edges 3 edge lives
Notes
- spiral plunge-cutting, pockets larger than Ø 60
- feed rate per tooth fz = 0.2-0.5 mm
- turnover knife 9209773 scoring without projection, suitable for jointing without groove
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z |
nmax
[min-1] |
L/R |
Number of cutting edges
[pc.] |
Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||
54 | 35 | 25 | 61 | 100 | 2+2 | 24,000 | R | 8 | 187269 | ||
61 | 35 | 25 | 61 | 100 | 2+2 | 24,000 | R | 8 | 187369 |