178311 - Roughing Cutters VHW - negative spiral
Technical data
Description
Machine / Application
- CNC routers
- for rough cutting in solid woods, plywood and uncoated panels
- for cutting of cut-outs and contours
- traveling plunge cut using Z and X or Y axis
Design
- negative spiral for smaller workpieces hard to clamp with face side up
- n max = 30,000 min-1
Advantages
- high hogging volume
- cutting pressure towards the bottom thanks to negative spiral
Notes
- slightly rough cutting surface due to fine cut division
- clamping elements: ps-System with reducing sleeves Class-No. 933280, TRIBOS, draw-in collet chuck
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 16 [mm] | |
L2 = Cutting width | 35 [mm] | |
Ø d = Shank diameter | 16 [mm] | |
L3 = Shank length | 48 [mm] | |
L1 = Total length | 90 [mm] | |
Z = No. of teeth | 3 | |
Helical direction = Helical direction | negative | |
nmax = maximum RPM | 30,000 [min-1] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Remarks | Type 1 | |
Dimensions entered are not listed?
available from stock |