187268 - Shank-Type Cutters with HW Turnover Knives - t3-System
Technical data
Description
Machine / Application
- CNC and joinery machines
- For offset- and chip-free jointing, rabbeting and sizing of solid wood
Design
- Rounded triangular turnover knives with cutting edges drawing from bottom to top and from top to bottom
- Cutting material: HW
- HL Solid 20 for hard wood and soft wood
- HL Board 06 for wood-based materials, plastics and hard woods
- topcoat coating for increased edge lives
Advantages
- absolutely chip-free jointing and rabbeting
- Thanks to the rounded turnover knives the machined surface is offset-free
- excellent edge and surface quality
- very high milling performance
- spiral plunge-cutting for free form milling
- Triangular turnover knives with rounded edges 3 edge lives
Notes
- spiral plunge-cutting, pockets larger than Ø 60
- feed rate per tooth fz = 0.2-0.5 mm
- turnover knife 9209773 scoring without projection, suitable for jointing without groove
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 54 [mm] | |
L2 = Cutting width | 78 [mm] | |
Ø d = Shank diameter | 20 [mm] | |
L3 = Shank length | 52 [mm] | |
L1 = Total length | 133.5 [mm] | |
Z = No. of teeth | 2+2 | |
nmax = maximum RPM | 12,000 [min-1] | |
L/R = cutting direction | R | |
Number of cutting edges | 14 [pc.] | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |
Turnover Knives
Product picture | Description | Design | Ident-No. | ||
---|---|---|---|---|---|
Turnover Knives HW with 3 cutting edges and countersink - with rounded edges | 20,88x18.3x3.0N | 187694 | |||
Turnover Knives HW with 3 cutting edges and countersink - with rounded edges | 20,88x18.3x3.0N | 187692 | |||
Turnover Knives HW with 3 cutting edges and countersink - with rounded edges | 20,88x18.3x3.0N | 187251 | |||
Turnover Knives HW with 3 cutting edges - with rounded edges | 20,38x17.9x3.0N | 9209773 | |||
available from stock |