184380 - p-System High-Performance Shank-Type Cutters CM DP
Technical data
Description
Machine / Application
- CNC stationary machines
- for chip-free high-performance jointing and dividing of solid woods (free of knots) along and accross the grain
- for jointing and dividing of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
- Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
Design
- extremely scoring cut
- DP plunge tip
Advantages
- maximum cutting quality and edge lives
- large depth of cut possible
- chip-free cuts even on the exit side
- perfectly suitable for laser-edge-technology
Notes
- Adjust the tool to run centrally to the workpiece
- Tools with plunge tip (L4) must project at least 4.5 mm on bottom side of workpiece in order to bring p-System cutting edges into action
- for inclined or circular plunge-cutting only
- recommended feed rate per tooth (depending on the diameter): wood-based panels 0.2 - 0.3 mm, solid wood 0.15 - 0.2 mm
- Clamping element: precision clamping element e.g. ps-System, TRIBOS
- with thread for length adjusting screw
- Sense of rotation according to VDMA 8849
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 20 [mm] | |
L4 = Cuttind width 1 | 3.8 [mm] | |
L2 = Cutting width | 29,5 [mm] | |
Ø d = Shank diameter | 25 [mm] | |
L3 = Shank length | 55 [mm] | |
L1 = Total length | 110 [mm] | |
Z = No. of teeth | 1+1 | |
nmax = maximum RPM | 24,000 [min-1] | |
H = Wood thickness | 26,5 [mm] | |
Shear∡ = Shear angle | 70 [°] | |
Resharpening area = Resharpening area | 2.5 [mm] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Remarks | symmetrical | |
Dimensions entered are not listed?
available from stock |