Chop Saw Blades DP "HR" - nn-System DP flex
Article
Description
Machine / Application
- CNC machining centers and aggregates
- for precise cutting in all common wood-based panels such as raw and laminated particle and MDF boards, plywood boards, HDF, WPC, cement and gypsum fiber boards, mineral composites, Alucobond, ...
- for ripping and cross cuts in solid wood, glued laminated timber, thermotreated wood
Design
- resharpenable up to 2 times
- small gullets
- special cutting edge geometry
- tooth configuration: hollow back tooth "HR"
- cutting material: DP
Advantages
- hardly perceivable noise level
- highest productivity and economic efficiency thanks to extremely long edge lives due to DP-tipping
- reduced cutting pressure thanks to hollow back tooth geometry
Notes
- it is not recommended to use the saw blades for longitudinal cuts in soft wood and material thicknesses of more than 40 mm
- chip-free cuts can only be guaranteed in combination with a suitable scoring saw blade
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Tooth geometry | Machine/Type | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||
180 | 2,5 | 2 | 30 | 36 | 2 x 4/6/52 | 10 | HR | Homag, Weeke | 192432 | ||
180 | 2,5 | 2 | 40 | 36 | 8/6/52 | 10 | HR | Homag, Weeke | 193319 | ||
200 | 2,5 | 2 | 30 | 40 | 2 x 4/6/52 | 10 | HR | Homag | 192433 | ||
200 | 2,5 | 2 | 30 | 40 | 2/6,2/42 + 4/6,6/60 | 10 | HR | IMA | 192434 | ||
220 | 2,5 | 2 | 30 | 44 | 10 | HR | 192435 | ||||
220 | 2,5 | 2 | 40 | 44 | 8/6/52 | 10 | HR | Homag, Weeke | 192436 | ||
240 | 2,5 | 2 | 30 | 50 | 2 x 4/6/52 | 10 | HR | Homag | 192437 | ||
240 | 2,5 | 2 | 40 | 50 | 8/6/52 | 10 | HR | Homag, Weeke | 192438 | ||
240 | 2,5 | 2 | 30 | 50 | 2/6,2/42 + 4/6,6/60 | 10 | HR | IMA | 192439 |