192437 - Chop Saw Blades DP "HR" - nn-System DP flex
Technical data
Description
Machine / Application
- CNC machining centers and aggregates
- for precise cutting in all common wood-based panels such as raw and laminated particle and MDF boards, plywood boards, HDF, WPC, cement and gypsum fiber boards, mineral composites, Alucobond, ...
- for ripping and cross cuts in solid wood, glued laminated timber, thermotreated wood
Design
- resharpenable up to 2 times
- small gullets
- special cutting edge geometry
- tooth configuration: hollow back tooth "HR"
- cutting material: DP
Advantages
- hardly perceivable noise level
- highest productivity and economic efficiency thanks to extremely long edge lives due to DP-tipping
- reduced cutting pressure thanks to hollow back tooth geometry
Notes
- it is not recommended to use the saw blades for longitudinal cuts in soft wood and material thicknesses of more than 40 mm
- chip-free cuts can only be guaranteed in combination with a suitable scoring saw blade
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 240 [mm] | |
B = Cutting width | 2,5 [mm] | |
b = Body thickness | 2 [mm] | |
Ø d = Bore diameter | 30 [mm] | |
Z = No. of teeth | 50 | |
NL = Pin holes | 2 x 4/6/52 | |
Hook angle = Hook angle | 10 [°] | |
Tooth geometry = Tooth configuration | HR | |
L = Delivery Status | ||
Machine/Type | Homag | |
Dimensions entered are not listed?
available from stock |