CompactTec N Hoggers CM DP for LEUCO s-System Ø 192 mm (RZ/DZ)
Article
Description
Machine / Application
- double end tenoners
- edge trimming machines
- for chip-free sizing of raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- negative hook angle
- tooth configuration chamfer ascending
- with shear angle
- resharpenable area 4 mm
Advantages
- improved chip evacuation thanks to chip evacuation integrated in the tool (ChipMeister)
- reduced cleaning effort
- reduction of suction power
- long edge lives thanks to negative hook angle
- minimal machine downtimes thanks to long edge lives
- excellent cutting quality thanks to high concentric and runout accuracy
Notes
- for scoring/hogging (RZ) and double hogging (DZ) process
- application with feed for cutting with and across the grain
- sides of teeth can be resharpened
- the specified feed rates are based on n = 6,000 min-1
- sense of rotation according to VDMA 8849
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Feed DZ
[m/min] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||
250 | 20-17 | 20 | 80 | 30+5+5 | 30 | R | 182546 | ||
250 | 20-17 | 20 | 80 | 30+5+5 | 30 | L | 182547 | ||
250 | 20-17 | 20 | 80 | 36+6+6 | 35 | R | 182548 | ||
250 | 20-17 | 20 | 80 | 36+6+6 | 35 | L | 182549 | ||
250 | 20-17 | 20 | 80 | 48+6+6 | 50 | R | 182550 | ||
250 | 20-17 | 20 | 80 | 48+6+6 | 50 | L | 182551 |