182546 - CompactTec N Hoggers CM DP for LEUCO s-System Ø 192 mm (RZ/DZ)
Product
Drawing
-
- Polycrystalline diamond [DP]
- MEC
Technical data
Description
Machine / Application
- double end tenoners
- edge trimming machines
- for chip-free sizing of raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- negative hook angle
- tooth configuration chamfer ascending
- with shear angle
- resharpenable area 4 mm
Advantages
- improved chip evacuation thanks to chip evacuation integrated in the tool (ChipMeister)
- reduced cleaning effort
- reduction of suction power
- long edge lives thanks to negative hook angle
- minimal machine downtimes thanks to long edge lives
- excellent cutting quality thanks to high concentric and runout accuracy
Notes
- for scoring/hogging (RZ) and double hogging (DZ) process
- application with feed for cutting with and across the grain
- sides of teeth can be resharpened
- the specified feed rates are based on n = 6,000 min-1
- sense of rotation according to VDMA 8849
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 250 [mm] | |
| B = Cutting width | 20-17 [mm] | |
| b = Hub width | 20 [mm] | |
| Ø d = Bore diameter | 80 [mm] | |
| Z = No. of teeth | 30+5+5 | |
| Feed DZ = Recommended feed DZ | 30 [m/min] | |
| L/R = cutting direction | R | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
