High-Performance Shank-Type Cutters DP - Z=2+1+2
Article
Description
Machine / Application
- CNC routers
- for sizing and dividing cuts in raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- high-performance tool for rough and finish milling
- Z=1 in middle layer and Z=2 in covering layer
- face cutting for diagonal plunge-cutting
- with shear angle
- resharpening area 3.0 mm
- n max = 24,000 min-1
Advantages
- good cutting quality on top and bottom edge thanks to opposing shear angle
- reduced vibrations thanks to variable pitch
- optimum good chip disposal thanks to open arrangement of cutting edges
Notes
- feed speed up to 20 m/min when jointing
- feed speed up to 12 m/min when sizing
- Clamping elements: ps-System, TRIBOS , draw-in collet chuck
- with thread for length adjusting screw
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z |
nmax
[min-1] |
H
[mm] |
Resharpening area
[mm] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||
20 | 28 | 25 | 60 | 100 | 2+1+2 | 24,000 | 12-25 | 3 | R | 181481 | ||
25 | 35 | 25 | 60 | 110 | 2+1+2 | 24,000 | 18-32 | 3 | R | 181483 | ||
25 | 42 | 25 | 60 | 120 | 2+1+2 | 24,000 | 25-40 | 3 | R | 181485 | ||
25 | 48 | 25 | 62 | 120 | 2+1+2 | 24,000 | 32-45 | 3 | L | 181486 | ||
25 | 48 | 25 | 62 | 120 | 2+1+2 | 24,000 | 32-45 | 3 | R | 181487 |