181481 - High-Performance Shank-Type Cutters DP - Z=2+1+2
Technical data
Description
Machine / Application
- CNC routers
- for sizing and dividing cuts in raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- high-performance tool for rough and finish milling
- Z=1 in middle layer and Z=2 in covering layer
- face cutting for diagonal plunge-cutting
- with shear angle
- resharpening area 3.0 mm
- n max = 24,000 min-1
Advantages
- good cutting quality on top and bottom edge thanks to opposing shear angle
- reduced vibrations thanks to variable pitch
- optimum good chip disposal thanks to open arrangement of cutting edges
Notes
- feed speed up to 20 m/min when jointing
- feed speed up to 12 m/min when sizing
- Clamping elements: ps-System, TRIBOS , draw-in collet chuck
- with thread for length adjusting screw
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 20 [mm] | |
L2 = Cutting width | 28 [mm] | |
Ø d = Shank diameter | 25 [mm] | |
L3 = Shank length | 60 [mm] | |
L1 = Total length | 100 [mm] | |
Z = No. of teeth | 2+1+2 | |
nmax = maximum RPM | 24,000 [min-1] | |
H = Stack height/cutting height | 12-25 [mm] | |
Resharpening area = Resharpening area | 3 [mm] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |