Polishing Shank-Type Cutter VHW for acrylic glass and PMMA - Z5
Article
Description
Machine / Application
- CNC routers
- for finishing of acrylics and PMMA with relatively clear surfaces
- attention: these tools are not suitable for sizing or dividing but only for polishing!
Design
- positive spiral
- high-quality solid tungsten carbide (VHW) with 5 cutting edges
Advantages
- reduced production times as postprocessing is no longer necessary
- produces relatively clear surfaces which are sufficient in many cases
Notes
- finish milling (removal of 0.05 - 0.1 mm) at a feedrate of approx. 0.5 – 1 m/min
- high RPM is recommended (18,000 - 24,000 min-1 or higher)
- application against feed
- the good quality can only be reached in connection with a precision clamping element
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L1
[mm] |
Z | Helical direction |
nmax
[min-1] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||
6 | 22 | 6,0 | 60 | 5 | positive | 24,000 | R | 184704 | ||
8 | 25 | 8,0 | 70 | 5 | positive | 24,000 | R | 184705 |