184704 - Polishing Shank-Type Cutter VHW for acrylic glass and PMMA - Z5
Technical data
Description
Machine / Application
- CNC routers
- for finishing of acrylics and PMMA with relatively clear surfaces
- attention: these tools are not suitable for sizing or dividing but only for polishing!
Design
- positive spiral
- high-quality solid tungsten carbide (VHW) with 5 cutting edges
Advantages
- reduced production times as postprocessing is no longer necessary
- produces relatively clear surfaces which are sufficient in many cases
Notes
- finish milling (removal of 0.05 - 0.1 mm) at a feedrate of approx. 0.5 – 1 m/min
- high RPM is recommended (18,000 - 24,000 min-1 or higher)
- application against feed
- the good quality can only be reached in connection with a precision clamping element
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 6 [mm] | |
L2 = Cutting width | 22 [mm] | |
Ø d = Shank diameter | 6,0 [mm] | |
L1 = Total length | 60 [mm] | |
Z = No. of teeth | 5 | |
Helical direction = Helical direction | positive | |
nmax = maximum RPM | 24,000 [min-1] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |