p-System High-Performance Grooving Shank-Type Cutters CM DP
Article
Description
Machine / Application
- CNC stationary machines
- for grooves, cut outs, pockets and as forend cutter
- for chip-free high-performance grooving of solid woods (free of knots) along and accross the grain
- for high-performance grooving of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
- Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
Design
- extremely scoring cut
Advantages
- maximum cutting quality and edge lives
- chip-free cuts even on the exit side
Notes
- minimal grooving depth 0.5 mm
- as from 25 mm Z=2 is possible, bottom cutting edge is Z=1 always
- convex bottom cutting edge for better bottom quality of rabbet, however corner of rabbet not absolutely sharp
- for ramping or circular plungeing only
- clamping element: precision clamping element e.g. ps-System, TRIBOS, heat shrink-fit chuck
- with thread for length adjusting screw
- sense of rotation according to VDMA 8849
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z |
nmax
[min-1] |
Shear∡
[°] |
Resharpening area
[mm] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||
8 | 3,3 | 8,0 | 50 | 65 | 1+1 | 24,000 | 70 | 0.4 | R | 187844 | ||
8 | 3,3 | 10 | 50 | 65 | 1+1 | 24,000 | 70 | 0.4 | R | 186095 | ||
10 | 4,8 | 12 | 45 | 65 | 1+1 | 24,000 | 70 | 0.9 | R | 186096 | ||
10 | 10,4 | 12 | 45 | 70 | 1+1 | 24,000 | 70 | 0.9 | R | 186097 | ||
12 | 21,4 | 12 | 50 | 90 | 1+1 | 24,000 | 70 | 1.4 | R | 185506 | ||
12 | 10,2 | 16 | 45 | 80 | 1+1 | 24,000 | 70 | 1.4 | R | 185505 | ||
12 | 21,4 | 16 | 45 | 90 | 1+1 | 24,000 | 70 | 1.4 | R | 185507 | ||
16 | 14 | 16 | 45 | 85 | 1+1 | 24,000 | 70 | 1.9 | R | 185508 | ||
16 | 24,4 | 16 | 45 | 90 | 1+1 | 24,000 | 70 | 1.9 | R | 185509 | ||
16 | 32,2 | 16 | 45 | 90 | 1+1 | 24,000 | 70 | 1.9 | R | 186098 | ||
18 | 19 | 16 | 55 | 95 | 1+1 | 24,000 | 70 | 2.4 | R | 185612 | ||
18 | 7,0 | 20 | 55 | 90 | 1+1 | 24,000 | 70 | 2.4 | R | 185613 | ||
18 | 19 | 20 | 55 | 95 | 1+1 | 24,000 | 70 | 2.4 | R | 185614 | ||
25 | 9,4 | 25 | 50 | 95 | 1+1 | 24,000 | 70 | 2.4 | R | 185615 | ||
25 | 18 | 25 | 50 | 100 | 1+1 | 24,000 | 70 | 2.4 | R | 185616 |