185505 - p-System High-Performance Grooving Shank-Type Cutters CM DP
Technical data
Description
Machine / Application
- CNC stationary machines
- for grooves, cut outs, pockets and as forend cutter
- for chip-free high-performance grooving of solid woods (free of knots) along and accross the grain
- for high-performance grooving of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
- Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
Design
- extremely scoring cut
Advantages
- maximum cutting quality and edge lives
- chip-free cuts even on the exit side
Notes
- minimal grooving depth 0.5 mm
- as from 25 mm Z=2 is possible, bottom cutting edge is Z=1 always
- convex bottom cutting edge for better bottom quality of rabbet, however corner of rabbet not absolutely sharp
- for ramping or circular plungeing only
- clamping element: precision clamping element e.g. ps-System, TRIBOS, heat shrink-fit chuck
- with thread for length adjusting screw
- sense of rotation according to VDMA 8849
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 12 [mm] | |
L2 = Cutting width | 10,2 [mm] | |
Ø d = Shank diameter | 16 [mm] | |
L3 = Shank length | 45 [mm] | |
L1 = Total length | 80 [mm] | |
Z = No. of teeth | 1+1 | |
nmax = maximum RPM | 24,000 [min-1] | |
Shear∡ = Shear angle | 70 [°] | |
Resharpening area = Resharpening area | 1.4 [mm] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |