p-System High-Performance Rabbeting Shank-Type Cutter CM DP
Article
Description
Machine / Application
- 5-axis machining centers
- for chip-free high-performance rabbeting of solid woods (free of knots) along and accross the grain
- for high-performance rabbeting of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
- Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
Design
- extremely scoring cut
- tool to be used on spindle tilted by 5°
- resharpening area front 2.5 mm, peripheral side 3 mm
Advantages
- maximum cutting quality on both rabbeting sides and maximum edge lives
- chip-free cuts even on the exit side
Notes
- recommended feed rate per tooth: wood-based panels 0.5 - 0.8 mm, solid wood 0.25 - 0.4 mm
- clamping element: precision clamping element e.g. ps-System, TRIBOS, heat shrink-fit chuck
- with thread for length adjusting screw
- sense of rotation according to VDMA 8849
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z |
nmax
[min-1] |
FB
[mm] |
FT
[mm] |
Shear∡
[°] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||||
100 | 18,6 | 25 | 65 | 99 | 3+3 | 19,100 | 10 | 15 | 70 | R | 184731 | ||
100 | 28,3 | 25 | 65 | 110 | 3+3 | 19,100 | 16 | 25 | 70 | R | 184732 | ||
100 | 43 | 25 | 65 | 120 | 3+3 | 19,100 | 16 | 38 | 70 | R | 184733 |