184731 - p-System High-Performance Rabbeting Shank-Type Cutter CM DP
Technical data
Description
Machine / Application
- 5-axis machining centers
- for chip-free high-performance rabbeting of solid woods (free of knots) along and accross the grain
- for high-performance rabbeting of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
- Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
Design
- extremely scoring cut
- tool to be used on spindle tilted by 5°
- resharpening area front 2.5 mm, peripheral side 3 mm
Advantages
- maximum cutting quality on both rabbeting sides and maximum edge lives
- chip-free cuts even on the exit side
Notes
- recommended feed rate per tooth: wood-based panels 0.5 - 0.8 mm, solid wood 0.25 - 0.4 mm
- clamping element: precision clamping element e.g. ps-System, TRIBOS, heat shrink-fit chuck
- with thread for length adjusting screw
- sense of rotation according to VDMA 8849
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 100 [mm] | |
L2 = Cutting width | 18,6 [mm] | |
Ø d = Shank diameter | 25 [mm] | |
L3 = Shank length | 65 [mm] | |
L1 = Total length | 99 [mm] | |
Z = No. of teeth | 3+3 | |
nmax = maximum RPM | 19,100 [min-1] | |
FB = Rabbet width | 10 [mm] | |
FT = Rabbet depth | 15 [mm] | |
Shear∡ = Shear angle | 70 [°] | |
L/R = cutting direction | R | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |