p-System High-Performance Shank-Type Cutters CM DP - Weeke BHX 050/055
Article
Description
Machine / Application
- WEEKE BHX 050 and BHX 055 with delivery date as from Sept. 01, 2015
- BHX 50/055 machines with CNC controlled clamping devices (servo) and with delivery date as from 01.01.2014 only can be updated by the manufacturer (Note: Service charges will occur)
- for chip-free high-performance jointing and dividing of solid woods (free of knots) along and accross the grain
- for jointing and dividing of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
- Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
Design
- extremely scoring cut
- asymmetrical design
- DP plunge tip
Advantages
- maximum cutting quality and edge lives
- chip-free cuts even on the exit side
- increased contact pressure than conventional shank-type cutters
Notes
- Tools with plunge tip (L4) must project at least 4,5 mm on bottom side of workpiece in order to bring p-System cutting edges into action. D 30 is without plunge tip
- for ramping or circular plungeing only
- recommended feed rate per tooth: wood-based panels 0.3 - 0.35 mm, solid wood 0.15 - 0.2 mm
- clamping element: precision clamping element e.g. ps-System, TRIBOS
- with thread for length adjusting screw
- sense of rotation according to VDMA 8849
Ø D
[mm] |
L4
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z |
nmax
[min-1] |
Shear∡
[°] |
Resharpening area
[mm] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||||
20 | 4 | 25,1 | 25 | 51 | 105 | 1+1 | 24,000 | 70 | 2.5 | R | 185664 | ||
25 | 4 | 25,7 | 25 | 53 | 105 | 2+2+1 | 24,000 | 70 | 2.5 | R | 185663 | ||
25 | 4 | 30 | 25 | 53 | 110 | 2+2+1 | 24,000 | 70 | 2.5 | R | 185823 | ||
25 | 4 | 47,2 | 25 | 53 | 125 | 2+2+1 | 24,000 | 70 | 2.5 | R | 185824 |